Yaskawa 1000 Series Drive Option - Profibus-DP Installation - Manual (Page 22)

5 Installation Procedure
22 YASKAWA ELECTRIC TOBP C730600 42C 1000-Series Option SI-P3 Installation Manual
9.
Replace and secure the front covers of the drive (C, F) and replace the digital
operator (D).
Figure 11
Figure 11 Replace the Front Covers and Digital Operator
Note: Take proper precautions when wiring the option so the front covers will easily fit back onto the
drive. Make sure no cables are pinched between the front covers and the drive when replacing
the covers.
10.
Set drive parameters in Table 8 for proper option performance. Be sure to set
parameter F6-30 to a node address unique to the network.
◆
Communication Cable Specifications
To ensure proper performance, Yaskawa recommends using PROFIBUS-DP-dedicated
cables that fulfill the specifications in Table 6 . Refer to the PROFIBUS-DP website at
www.profibus.com for more information on cables.
F
C
D