Yaskawa 1000 Series Drive Option - Profibus-DP Installation - Manual (Page 18)

5 Installation Procedure
18 YASKAWA ELECTRIC TOBP C730600 42C 1000-Series Option SI-P3 Installation Manual
4.
Connect the ground wire (I) to the ground terminal (J) using one of the remaining
provided screws (H). Connect the other end of the ground wire (I) to the remaining
ground terminal and installation hole on the option using the last remaining provided
screw (H).
Figure 6
Figure 6 Connect the Ground Wire
Note: There are two screw holes on the drive for use as ground terminals. When connecting three
options, two ground wires will need to share the same drive ground terminal.
5.
Select the proper type of PROFIBUS-DP-dedicated cables and network cable.
Refer to Communication Cable Specifications on page 22 for details on cable
selections and cable lengths.
Refer to the PROFIBUS-DP website at www.profibus.com for more information on
cables and connectors.
BF
H
I
J