Yaskawa 1000 Series Drive Option - MECHATROLINK-II Installation - Manual (Page 7)

1 Preface and Safety
YASKAWA ELECTRIC TOBP C730600 50C YASKAWA 1000-Series Option SI-T3 Installation Manual 7
■
General Safety
General Precautions
• The diagrams in this section may include units without covers or safety shields to
illustrate details. Be sure to reinstall covers or shields before operating any devices. The
option board should be used according to the instructions described in this manual.
• Any illustrations, photographs, or examples used in this manual are provided as
examples only and may not apply to all products to which this manual is applicable.
• The products and specifications described in this manual or the content and
presentation of the manual may be changed without notice to improve the product and/
or the manual.
• When ordering a new copy of the manual, contact your Yaskawa representative or the
nearest Yaskawa sales office and provide the manual number shown on the front cover.
DANGER
Heed the safety messages in this manual.
Failure to comply will result in death or serious injury.
The operating company is responsible for any injuries or equipment damage resulting
from failure to heed the warnings in this manual.
NOTICE
Do not modify the unit or option circuitry.
Failure to comply could result in damage to the unit or option and will void warranty.
YASKAWA is not responsible for any modification of the product made by the user. This
product must not be modified.
Do not expose the unit to halogen group disinfectants.
Failure to comply may cause damage to the electrical components in the option.
Do not pack the unit in wooden materials that have been fumigated or sterilized.
Do not sterilize the entire package after the product is packed.