Yaskawa 1000 Series Drive Option - MECHATROLINK-II Installation - Manual (Page 4)

4 YASKAWA ELECTRIC TOBP C730600 50C YASKAWA 1000-Series Option SI-T3 Installation Manual
1 Preface and Safety
1 Preface and Safety
Yaskawa manufactures products used as components in a wide variety of industrial systems
and equipment. The selection and application of Yaskawa products remain the responsibility
of the equipment manufacturer or end user. Yaskawa accepts no responsibility for the way its
products are incorporated into the final system design. Under no circumstances should any
Yaskawa product be incorporated into any product or design as the exclusive or sole safety
control. Without exception, all controls should be designed to detect faults dynamically and
fail safely under all circumstances. All systems or equipment designed to incorporate a
product manufactured by Yaskawa must be supplied to the end user with appropriate
warnings and instructions as to the safe use and operation of that part. Any warnings
provided by Yaskawa must be promptly provided to the end user. Yaskawa offers an express
warranty only as to the quality of its products in conforming to standards and specifications
published in the Yaskawa manual. NO OTHER WARRANTY, EXPRESS OR IMPLIED, IS
OFFERED. Yaskawa assumes no liability for any personal injury, property damage, losses,
or claims arising from misapplication of its products.
◆
Applicable Documentation
The following manuals are available for SI-T3 MECHATROLINK-II Option:
Option
YASKAWA 1000 Series Option
MECHATROLINK-II
Installation Manual (this book)
Manual No.: TOBP C730600 50
Read this manual first.
The installation manual is packaged with the
option and contains information required to
install the option and set up related unit
parameters.
YASKAWA AC Drive-Option Card
MECHATROLINK-II
Technical Manual
Manual No.: SIEP C730600 50
The technical manual contains detailed
information about the option. Access the
following sites to obtain the technical
manual:
U.S.: http://www.yaskawa.com
Europe: http://www.yaskawa.eu.com
Japan: http://www.e-mechatronics.com
For questions, contact your local Yaskawa
sales office or the nearest Yaskawa
representative.
YASKAWA 1000-Series Option
MECHATROLINK-II
Technical Manual
Manual No.: SIEP C730600 61
SI-T3