Yaskawa 1000 Series Drive Option - CC-Link Installation - Manual (Page 10)

10 YASKAWA ELECTRIC TOBP C730600 44A YASKAWA AC Drive-Option Card CC-Link Installation Manual
3 Receiving
3 Receiving
Please perform the following tasks after receiving the CC-Link Option:
• Inspect the CC-Link Option for damage.
If the CC-Link Option appears damaged upon receipt, contact the shipper immediately.
• Verify receipt of the correct model by checking the information on the PCB (see
Figure 2 ).
• If you have received the wrong model or the CC-Link Option does not function properly,
contact your supplier.
◆
Contents and Packaging
Table 1 Contents of Package
◆
Tool Requirements
A Phillips screwdriver (M3) metric or (#1, #2) U.S. standard size is required to install the
CC-Link Option.
A straight-edge screwdriver (M2, M3) is required to wire the terminal block.
Description: Option Card
Ground
Cable
Screws LED Label
Installation
Manual
−
Quantity: 1 1 3 1 1
L.EER
RD
L.RUN
SD
MANUAL