SMA SC 100 Indoor Installation - Manual (Page 9)

SMA Solar Technology AG Safety Instructions
Installation Guide SC-100-IEN093231 9
3.4 Checking and Storage
Upon receipt of the equipment, check the packaging and the device for any possible damage and
compare the contents of the delivery with the delivery documentation. In the case of damage to the
device and/or unclear delivery contents, please contact SMA Solar Technology AG immediately
(contact address is in the appendix).
3.5 Transport
Only the transport methods described in the installation guide are permissible. Please note the heavy
weight of the equipment and the non-central center of gravity. The center of gravity is marked on the
packaging.
3.6 Installation
The information contained in the installation guide must be observed when installing the inverter. The
SC 100 Indoor is designed for indoor installation, with a protection rating of IP21. The SC 100
Outdoor is designed for outdoor installation, with a protection rating of IP44/54. The device must be
installed in a manner such that the proper electrical connections, adequate ventilation, and adequate
fire protection are possible.
The Sunny Central SC100 Outdoor product line has been type-tested and approved for outdoor
installation in accordance with the industry-standard EMC limits (EMC = Electro Magnetic
Compatibility).
The equipment may only be stored when closed, thus ensuring its interior is protected from
dust and moisture.
During longer storage periods, the equipment must be kept in a dry place to prevent
moisture from entering the inverter.
WARNING!
Danger of tipping during transport.
Follow the "Sunny Central Transport Instructions" in Appendix A and pay attention to the
center of gravity markings on the packaging.
Please observe the additional information on installing the SC 100 Outdoor located in
Appendix C.