SMA SC 100 Indoor Installation - Manual (Page 24)

On-Site Inverter Installation SMA Solar Technology AG
24 SC-100-IEN093231 Installation Guide
6 On-Site Inverter Installation
6.1 Mounting on the Foundation
Removing the Transport Locks
The inverter must be fixed to the foundation or foundation slab. Therefore, the respective attachment
points (wall anchors, threaded bolts) must be in place before installation. A rig close to the base of
the device facilitates its attachment to the foundation. The corresponding figure is found in
Appendix D.
After attaching the device to the foundation, remove the transformer transport lock. This consists of an
iron right-angle that is fastened to the side of the cabinet.
Figure 6.1: View of transformer transport lock with sidewall removed
Attaching the inverter to the foundation or the foundation plate.
Angle bracket