SMA AUTOMATIC SWITCH BOX L - Manual (Page 42)

Decommissioning SMA Solar Technology AG
42 AS-BoxL-IEN084410 Installation Guide
8 Decommissioning
8.1 Disassembling the Product
1. Open the Automatic Switch Box as described in Section 7.1 "Opening the Product" (page 41).
2. Remove all cables from the Automatic Switch Box.
3. Unscrew the fixing screws of the Automatic Switch Box.
4. Remove the Automatic Switch Box.
5. Lock Automatic Switch Box with the switch cabinet key.
☑ The Automatic Switch Box is disassembled.
8.2 Storing the Product
Store the Automatic Switch Box in a dry place where the ambient temperature is always between
–25°C and +50°C.
8.3 Disposing of the Product
Dispose of the Automatic Switch Box at the end of its service life in accordance with the disposal
regulations for electronic waste applicable at the installation site at that time.
CAUTION!
Risk of injury from Automatic Switch Box falling during transport. Physical injury
(fractures or crushing) and/or damage to the Automatic Switch Box.
• Take the Automatic Switch Box's weight (approx. 41 kg) into account.
DANGER!
Electric shock from working under voltage. Death or serious burns.
Observe the following requirements before removal:
• Completely disconnect the Sunny Backup system and ensure that it does not switch
back on.
• Ensure that no voltage is present in the system.
• Ground and short-circuit (up to 1000 V).
• Cover or shield any adjacent voltage-carrying parts.