SMA AUTOMATIC SWITCH BOX L - Manual (Page 26)

Electrical Connection SMA Solar Technology AG
26 AS-BoxL-IEN084410 Installation Guide
Connection procedure
1. Select a suitable opening for the feed-in meter cable and poke a hole through it with a pointy
tool.
The cable has to be tightly enclosed by the opening after it is inserted.
2. Pull the cable of the feed-in meter through the opening into the Automatic Switch Box.
3. Connect PE to the "X5/PV Meter" connection terminal according to the label.
4. Connect N to the "X5/PV Meter" connection terminal according to the label.
5. Connect L1, L2 and L3 to the "X5/PV Meter" connection terminal according to the label.
☑ The feed-in meter is now connected to the Automatic Switch Box.