SMA PVO-N-20 - Manual (Page 18)

5 Assembly SMA Solar Technology AG
18 PVO-BOX-IA-en-10 Installation Manual
5.2 Mounting the SMA PV Offset Box
1. Mark the position of the drill holes.
3. Drill the holes.
4. Insert the wall plugs.
5. Screw the SMA PV Offset Box to the mounting
surface.
6. Check that the SMA PV Offset Box is fixed securely to the surface.
2.
Danger to life due to electric shock or explosion if you drill into utility lines.
There may be gas pipes or electric cables located behind the mounting points which could be
damaged when you drill the holes for the SMA PV Offset Box.
• Make sure that there are no utility lines behind the mounting points.