SMA FLX Series PLA Option - Manual (Page 11)

2.1.2 Configuring Remotely Controlled
Adjustment of Reactive Output Power
Level
To configure the remotely controlled Power Level
Adjustment, choose the ‘Reactive power’ submenu.
• Set the ‘Remotely controlled reactive power (Q)’
radio button.
• Configure the relay states (K1–K6) according to
the requirements of the DNO by entering the
appropriate reactive power setpoint of Q for each
relay state specified by the DNO. The value
entered is set on each inverter and represents the
amount of reactive power that the inverter will
deliver.
• Leave Q settle time at 10 s, unless otherwise
specified by the DNO.
NOTICE
Q values can also be entered as absolute values by
changing the unit using the drop-down box.
Illustration 2.3 Configuring Reactive Power Control
Setup
10 L00410649-02_2q / Rev. date: 2014-06-20
2 2