SMA FLX Series PLA Option - Manual (Page 10)

2.1.1 Configuring Remotely Controlled
Adjustment of Active Output Power
Level
To configure the remotely controlled Power Level
Adjustment, choose the ‘Active power’ submenu.
• Enable the ‘Remotely controlled Power Level
Adjustment’ radio button.
• 64 possible relay configurations are available.
• Per default 4 relay inputs are active.
• Follow the information provided by the DNO and
enter the appropriate power level for each relay
state.
The value entered is set on each inverter and is the
maximum percentage of nominal active power that the
inverter is capable of delivering.
Illustration 2.2 Configuring Active Power Control – PLA
To proceed with the configuration guide, press ‘Next’.
Setup
L00410649-02_2q / Rev. date: 2014-06-20 9
2 2