Eclipse - Fujitsu Ten CD3100 - Manual (Page 61)

Others
61
XVII
Others
Connecting portable audio
players to the AUX jack
Use a commonly available accessory cord with
an optional AUX105 to connect a portable audio
player to the AUX (auxiliary) jack of this system.
A connection terminal for optional LAN cable
(AUX105) is provided on this unit.
The AUX mode is activated.
For details, refer to "Switching Audio
Modes" on page 15.
ATTENTION
• While the AUX mode is activated, actions
such as turning off the audio player or
pulling out the connection cord may cause
noise spikes that can damage the system
speakers. Be sure to avoid this possibility
by turning off system power or switching
from AUX mode to another mode before
shutting off or disconnecting the portable
audio player.
• Audio output levels will differ for the various
devices that can be connected by this
method. Carefully adjust volume until the
output level of the connected player is
known.
• Before using a portable audio player in a
vehicle, read the player's operation manual
carefully and confirm problem-free
operation in the vehicle before proceeding.
• When you connect an optional LAN cable
(AUX 105) to the main unit, another optional
equipment using E-LAN cannot be
connected.
Switching the AUX mode on and off
The Menu selection mode is activated.
The function mode is activated.
The AUX mode is activated.
Each time the button is pressed, the
setting item changes as follows.
Upper: ON
Lower: OFF
The selected settings will take effect.
Changing auxiliary input sensitivity
The sensitivity of the auxiliary mode can be changed.
The Menu Selection mode is activated.
The function mode is activated.
The AUX sense mode is activated.
Pressing the button allows you to
toggle through sensitivity modes as
follows:
Low
↔ Mid ↔ Hi ↔ Low ↔
The selected settings will take effect.
1
Turn on the portable audio player
and start its play function.
1
Press the [EQ/MENU] button for
more than one second.
2
Press the [SELECT] (Upper/Lower)
to select FUNCTION then press the
[ENTER] button.
3
Press the [SELECT] (Upper/Lower)
button to select the AUX.
4 Press the [SELECT] (Upper/Lower)
button to select ON/OFF.
5 Press the [EQ/MENU] or [RTN] button
to exit sound adjustment mode.
1
Press the [EQ/MENU] button for
more than one second.
2 Press the [SELECT] (Upper/Lower)
to select FUNCTION then press the
[ENTER] button.
3
Press the [SELECT] (Upper/Lower)
button to select the AUX SENSE.
4 Press the [SELECT] (Upper/Lower)
button to select the sensitivity mode.
5 Press the [EQ/MENU] or [RTN]
button to exit function mode.
XVI