Eclipse - Fujitsu Ten CD3100 - Manual (Page 54)

54
About optional unit
How to operate the tuner with an optional SIRIUS
satellite radio tuner connected (U.S.A./CANADA only)
About SIRIUS satellite radio
If the optional SIRIUS satellite radio tuner unit is
connected, satellite radio broadcast can be
received.
With SIRIUS satellite radio, over 125 channels
are available including music, sports, news, and
entertainment programs.
The channel can be selected from categories
such as POP and ROCK, or by selecting
individual channel manually.
Reception of SIRIUS satellite radio is fee based;
you have to subscribe to it.
It is possible to subscribe through the SIRIUS
radio website.
URL: http://cdn.sirius.com
ATTENTION
For information about the operation and set-up
of the SIRIUS satellite radio tuner unit, see the
SIRIUS satellite radio unit's owner's manual.
The main unit will accept up to 24 stations in
memory.
Selecting the radio mode
For details, refer to "Switching Audio
Modes" on page 15.
Selecting a channel
Radio bands will switch from SR1
→
SR2
→
SR3
→
SR4 in order each time
the button is pressed.
Right: Selects the higher channel.
Left: Selects the lower channel.
Reception is enabled for all channels
within the currently selected category.
(Refer to page 54 for details on
"Category selection".)
Right: Starts searching toward
higher channels.
Left: Starts searching toward
lower channels.
Operations during rotary mode
Turn to the right:
Tunes to higher channels.
Turn to the left:
Tunes to lower channels.
Category selection
The channel can be selected from among
categories such as POP and ROCK.
Consult the SIRIUS web site for details of
categories.
Categories will switch in order shown
below each time button is pressed.
Upper: Advance to next category.
Lower: Return to previous
category.
1 Switch to SIRIUS satellite radio
mode.
1 Press the [RTN] button for less
than one second to switch to the
desired SR bands.
2 Press the [SELECT] (Right/Left)
button to tune to a channel.
3
Press the [SELECT] (Right/Left)
button for more than one second
to start the automatic channel
search.
1
Turn the [VOL] button.
1 Press the [SELECT] (Upper/Lower)
button for less than one second.