Eclipse - Fujitsu Ten CD3100 - Manual (Page 49)

How to operate the main unit with an optional CD changer connected
49
XII
Repeating the same track
(REPEAT)
Pressing on the button for less than
one second causes the changer to
repeat the track currently being
played, until the button is pressed
again.
Press the button for longer than a
second to repeat all tracks on the CD
being played.
Playing tracks in random order
(RANDOM)
Pressing on the button for less than
one second causes the changer to
play the tracks on the currently playing
CD in random order, until the button is
pressed again.
Press the button for longer than a
second to play tracks from all of CDs
loaded in the currently selected
changer, in random order.
ATTENTION
• During random playback, press the [5 RPT]
button to repeat the track being played. To
cancel repeat play (go back to random
play), press the [5 RPT] button again.
During playback of a particular track: The
track being played is played repeatedly.
While searching: The following track is
played repeatedly.
• Occasionally the same track happens to be
played (selected) two or more times in a
row, but it is not a sign of a problem.
• When any of the functions - "Playing the
beginning of tracks", "Repeating the same
track" and "Playing tracks in random order"
- is selected, a message such as [SCAN],
[ALL SCAN], [REPEAT], [ALL REPEAT],
[RANDOM] or [ALL RANDOM] appears on
the display to verify the current function.
• Random play is not canceled even if a
magazine is ejected.
Skipping to the next or previous
CD
Upper:
Selects the next higher number
disc.
Lower:
Selects the next lower number disc.
Specifying a CD to play
A CD of your choice is directly selectable out of
the loaded discs.
To select a CD from nos. 7 to 12, press
the desired button considerably longer.
1
Press the [5 RPT] button.
1
Press the [6 RAND] button.
1 Press [SELECT] (Upper/Lower)
button.
1 Press the [MODE] button for more
than one second.
2
Press a button from [1] to [6].
Buttons 1 2 3 4 5 6
CD 1 2 3 4 5 6
7 8 9 10 11 12
3 Press the [MODE] button for more
than one second to exit direct
select mode.