Eclipse - Fujitsu Ten CD3100 - Manual (Page 36)

36
Various Settings
Reading Area Shot data
The Area Shot data that has been downloaded
from E-iSERV (web site) to a CD-R can be
loaded into the main unit and saved there.
The Menu Selection mode is activated.
The function mode is activated.
The front panel opens automatically.
If there are no correct files on the CD-
R, "NO DATA" is displayed.
The selected file will be saved.
"READING" is displayed. When
reading has finished, [COMPLETED]
will appear on the display and then it
will return to the display for selecting
the function mode. [FILE ERR]
appears if the system is unable to read
the file.
Activating the Area Shot mode
Intersection street names and turning
directions are displayed on the screen.
Pressing and holding the [MUTE/Area
Shot] button (for 1 second or more) a
second time closes the Area Shot
mode.
1 Press the [EQ/MENU] button for
more than one second.
2
Press the [SELECT] (Upper/ Lower)
button to select FUNCTION then
press the [ENTER] button.
3 Press the [SELECT] (Upper/ Lower)
button to select the AREA SHOT.
4
Press the [ENTER] button.
5
Insert the CD-R to be used for read
the Area Shot data.
6 Press the [SELECT] (Upper/
Lower) button to select the saving
file.
7
Press the [ENTER] button.
CAUTION
• Do not turn the ignition switch or power
to the main unit ON or OFF (or remove
the front panel of the main unit) while
data reading is in progress. Data
reading will be interrupted and data may
be damaged.
• Only the [ (OPEN/EJECT)] button
can be operated while the system is
reading data. Ejecting the CD-R stops
reading the data and the data will not be
saved in the main unit.
1 Press the [MUTE/Area Shot] button
for more than one second.
● Note ●
• Confirm the caution display and
press [ENTER] to turn ON the
Area Shot mode.
CAUTION
• Modes may not be changed if guidance
data has not been imported properly.
• Do not look at the screen while driving.