HEIDENHAIN SHB Data Interfaces for HEIDENHAIN - Manual (Page 67)

7 – 68 HEIDENHAIN Service Manual for Data Interfaces
7.3 Ethernet Configuration in the TNC
7.3.1 Settings in DEFINE NET
The following settings are made in DEFINE NET:
ADDRESS:
1)
Information on the address of your TNC in the network (Internet).
MASK: 1) SUBNET MASK to "save" addresses in the network.
ROUTER:
1)
ROUTER addresses only have to be specified, if a branch into another network
level is required to reach the SERVER.
PROT:
1)
Here the format for data transfer is specified (RFC in most cases).
HW: Hardware configuration of the connection: 10BaseT (twisted pair)
10Base2 (COAX)