Epson Sylus Pro 10600 - Manual (Page 3)

EPSON Stylus Pro 10600
9/02 EPSON Stylus Pro 10600 - 3
Drivers
Macintosh ® System 8.5.1 through 9.x (OS X clients
supported via RIP, available from the EPSON web site for
download), Windows
® 95, Windows 98, Windows 2000,
Windows Me, Windows XP, and Windows NT ® 4.0. Raster
drivers are standard. For Adobe ® PostScript ® support, use the
optional EFI ® Fiery ® Spark Professional 2.0 Software RIP or a
third-party software solution.
Interfaces
❏ USB (1.1 compatible); recommended cable length less than
6 feet (2 meters)
❏ Parallel (IEEE-1284 ECP mode)
❏ Ethernet network port (10/100 BaseT)
❏ IEEE 1394 (FireWire
® ) port
The following connections are supported for each operating
system:
* Supported on pre-installed operating systems (not upgraded from
earlier versions of Windows).
In addition, Macintosh OS X supports USB and Ethernet
when running applications in Classic mode.
Consumables and Accessories
Ink Cartridges
The printer’s first ink cartridges determine the type of ink the
printer uses for the lifetime of the unit:
❏ Photographic Dye ink
❏ Archival ink
❏ UltraChrome ink
Be sure to replace the cartridges with the same type as are
already installed, or you will see an error message and the
printer won’t work until you insert the correct cartridges.
If the printer uses UltraChrome ink, the user must decide
which type of black ink to install during initial setup (Matte
Black or Photo Black). Once installed, the user can switch
between black inks only by following the special procedure
described on page 11.
Use the cartridges listed below before the expiration date on
the package.
❏ Photographic Dye users:
❏ Archival ink users:
❏ UltraChrome ink users: *
* Your UltraChrome printer uses one of two black ink cartridges (Matte
Black or Photo Black). Unless you are switching between black ink
types (see page 11), use the same type as is currently installed. If you
install an incorrect cartridge, you will see an error message.
Accessories
* Replaces the blade for the printer’s built-in cutter.
** Designed for use with heavy media, which can damage the printer’s
built-in cutter.
Connection
Win
95 Win
98 Win
NT 4.0 Win
2000 Win
Me Win
XP
Mac
Parallel X X X X X X
USB X* X X X X
Ethernet X X X X X X X
FireWire X X X X
Black T499201 Light cyan T504201
Cyan T502201 Light magenta T503201
Magenta T501201 Yellow T500201
Black T511201 Light cyan T516201
Cyan T514201 Light magenta T515201
Magenta T513201 Yellow T512201
Photo Black T549100 Light cyan T549500
Matte Black T549800 Light magenta T549600
Cyan T549200 Yellow T549400
Magenta T549300
Part Part number
EFI Fiery Spark Professional 2.0 Software RIP C842912
Automatic Take-Up Reel System C12C815251
Replacement 44-inch Take-up Reel Core C815121
Paper Feed Spindle (Normal Tension) — 2-inch C811133
Paper Feed Spindle (High Tension) — 2-inch C811134
Paper Feed Spindle (High Tension) — 3-inch C811122
Replacement Printer Cutter Blade* C12C815271
Manual Media Cutting System** C815182
Replacement Manual Cutter Blade (for Manual
Media Cutting System) C815192