HEIDENHAIN TNC 620 (34056x-04) ISO programming - Manual (Page 302)

Programming: Special functions
10.3 Defining DIN/ISO Functions
10
302
TNC 620 | User's Manual for DIN/ISO Programming | 5/2013
10.3 Defining DIN/ISO Functions
Overview
If a USB keyboard is connected, you can also enter
the DIN/ISO functions by using the USB keyboard.
The TNC provides soft keys with the following functions for
creating DIN/ISO programs:
Function Soft key
Select DIN/ISO functions
Feed rate
Tool movements, cycles and program
functions
X coordinate of the circle center/pole
Y coordinate of the circle center/pole
Label call for subprogram and program section
repeat
Miscellaneous function
Block number
Tool call
Polar coordinate angle
Z coordinate of the circle center/pole
Polar coordinate radius
Spindle speed