HEIDENHAIN TNC 620 (34056x-04) ISO programming - Manual (Page 12)

Fundamentals
TNC model, software and features
12
TNC 620 | User's Manual for DIN/ISO Programming | 5/2013
New functions
New functions 34056x-04
The active tool-axis direction can now be activated in manual
mode and during handwheel superimposition as a virtual tool axis
(Superimposing handwheel positioning during program run: M118
(Miscellaneous Functions software option), page 290).
Writing and reading data in freely definable tables (Freely definable
tables, page 307).
New touch probe cycle 484 for calibrating the wireless TT 449 tool
touch probe (see User's Manual for Cycles).
The new HR 520 and HR 550 FS handwheels are supported
(Traverse with electronic handwheels, page 362).
New machining cycle 225 ENGRAVING (see User’s Manual for
Cycle Programming)
New Active Chatter Control (ACC) software option (Active Chatter
Control (ACC; software option), page 301).
New manual probing cycle "Center line as datum" (Setting a center
line as datum , page 401).
New function for rounding corners (Rounding corners: M197,
page 296).
External access to the TNC can now be blocked with a MOD
function (External access).