HEIDENHAIN 530 (340 49x-07) ISO programming User Manual

Page 20

New functions 340 49x

-06

In the positioning mode TURN of the PLANE function you can now
define a clearance height to which the tool is to be retracted before
tilting to tool axis direction (see “Automatic positioning:
MOVE/TURN/STAY (entry is mandatory)” on page 418)

Columns with special functions are also editable now

The form view of the tool data can now be exited with or without
saving changed values

The table view now offers a search function

Indexed tools are now shown correctly in the form view

The tool sequence list includes more detailed information now

The loading and unloading list of the tool magazine can now be
loaded and unloaded by drag and drop

Columns in the table view can be moved simply by drag and drop

Several special functions (SPEC FCT) are now available in the MDI
operating mode (see “Programming and Executing Simple
Machining Operations” on page 512)

There is a new manual probing cycle that can be used to
compensate workpiece misalignments by rotating the rotary table
(see “Workpiece alignment using 2 points” on page 495)

New touch probe cycle for calibrating a touch probe by means of a
calibration sphere (see User's Manual for Cycle Programming)

KinematicsOpt: Better support for positioning of Hirth-coupled axes
(see User's Manual for Cycle Programming)

KinematicsOpt: An additional parameter for determination of the
backlash in a rotary axis was introduced (see User's Manual for
Cycle Programming)

New Cycle 275 for Trochoidal Slot Milling (see User’s Manual for
Cycle Programming)

In Cycle 241 "Single-Fluted Deep-Hole Drilling" it is now possible to
define a dwell depth (see User's Manual for Cycle Programming)

The approach and departure behavior of Cycle 39 "Cylinder Surface
Contour" can now be adjusted (see User's Manual for Cycle
Programming)