HEIDENHAIN iTNC 530 (340 49x-01) ISO programming - Manual (Page 183)

HEIDENHAIN TNC iTNC 530 183
6.4 P
a
th Cont
ours—Car
te
sian Coor
dinat
e
s
Straight line at rapid traverse G00
Straight line with feed rate G01 F. . .
The TNC moves the tool in a straight line from its current position to
the straight-line end point. The starting point is the end point of the
preceding block.
Programming
8 Coordinates of the end point of the straight line
Further entries, if necessary:
8 Radius compensation G40/G41/G42
8 Feed rate F
8 Miscellaneous function M
Example NC blocks
Actual position capture
With the actual-position-capture function, you can transfer any desired
axis position into a block:
8 In the Manual Operation mode, move the tool to the position you
wish to capture.
8 Switch the screen display to Programming and Editing.
8 Select the program block into which you want to take over an axis
position.
8 Select the actual-position-capture function: In the soft-
key row the TNC displays the axes whose positions
can be transferred.
8 Select the axis, e.g. X: The TNC writes the current
position of the selected axis into the active input box.
N70 G01 G41 X+10 Y+40 F200 M3 *
N80 G91 X+20 Y-15 *
N90 G90 X+60 G91 Y-10 *
X
Y
60
15
40
10
10
20
1