HEIDENHAIN MSE 1110 - Manual (Page 25)

25
6. Installation
The safety of any system incorporating the use of this product is the
responsibility of the assembler or installer of the system.
Notice
Do not engage, or disengage any connections while the unit is under power.
Damage to internal components may result.
Data interface connections
Connecting a foot switch (MSE 1114)
This product can be used with HEIDENHAIN foot switch ID 681041-03.
To connect a foot switch:
X X Verify power is removed from all power supply modules in the module chain
X X Connect the foot switch cable connector to the foot switch connection 4 on the
module and tighten the cable connector screws until they are snug
Interfaces
1
Power indicator LED
2
Network LED indicator
4
Foot switch connection
5
RJ­45 for network connection
6
Encoder inputs: X11 ... X18
axis for linear and rotary EnDat
interface encoders. The number
of axes varies by module.
7 15 Module connectors
4
Foot switch connector