HEIDENHAIN MSE 1110 - Manual (Page 20)

20
4. Specifications
The MSE 1000 is an advanced system for performing production integrated
measurements at high levels of precision and accuracy. The modules described in these
instructions are designed for indoor use only. The MSE 1000 components shall only be
installed as described in these instructions. Mounting, installation and maintenance are to
be performed by qualified personnel only.
MSE 1114
ID 747499-01 MSE 1314
ID 747503-01 MSE 1318
ID 747504-01
Power consumption
1)
3.5 W 3.3 W 4.4 W
Data transfer Standard Ethernet, IEEE 802.3
Addressing Fixed IP address or DHCP
Operating temperature 0 °C ... 45 °C
Storage temperature -20 °C ... 70 °C
Relative humidity † 80 %
Altitude † 2000 m
Degree of protection IP65
Overvoltage category II, intended to be supplied from the building wiring
Pollution degree 2
Mass 620 g 480 g 740 g
1)
Power requirement of the module. Connected length gauges and encoders must be
considered additionally.
Notice
Refer to the MSE 1000 Product Information (ID 736907-xx) for power
consumption calculation examples.