HEIDENHAIN ND 281 B v.1 - Manual (Page 40)

40
Operating parameters for measured value output
Parameter Function
P50 RS232 Baud rate
P51 RS232 Number of additional blank lines for
measured value output
Display freeze during measured value output
In operating parameter P23, you can specify how the
measured value output signal will affect the display unit.
Display freeze during measured value output P23
Concurrent display, no display freeze: The
display value is the current measured value
DISPL. ACTL.
Frozen display: Display is stopped
(frozen) and updated by every
measured value output signal
DISPL. HOLD
Frozen/concurrent display: Display is
frozen as long as a measured value output
signal is present
DISPL. STOP
RS-232-C/V.24 Data Interface (X31)
187 + (11 • number of blank lines)
Measured value output via PRINT function
In the linear measurement mode
Press MOD repeatedly until the indicator PRINT blinks.
Start the measured value output with ENT.
In the angular measurement mode
Press MOD (this feature can be disabled with operating
parameter 86).
Duration of measured value transfer
t
D
= [ s]
Indicator preselection (linear measurement mode)
Operating parameter P86 allows you to define which indicator
is displayed first when MOD is pressed.
baud rate