Eicon Networks DIVA T/A ISDN Modem - Manual (Page 62)

DIVA T/A ISDN Modem Reference Guide
◆ Page 62
Mini-monitor Commands
The following commands relate to the Mini-monitor. They are all case sensitive.
Your Eicon Technology Customer Services representative may ask you to use these commands.
at@dump Dump Memory. Produces a memory dump using XMODEM.
Note: This command needs a terminal emulation program that supports XMODEM.
at@d1 DRAM test.
at@d2 Flash test.
at@d3 ISDN internal loop back test.
at@d4 ISDN external loop back test.
at@fail Simulate a fault.
at@load Load New Firmware.
Note: This command needs a terminal emulation program that supports XMODEM or
1K-XMODEM.
at@md arg Display memory (arg= “address:size”).
at@msg Display cause for entering the monitor.
at@quit Exit the Mini-monitor.
at>F Restore All Profiles to Original Factory Settings. Reverts the powerup profile to
number 0.
Warning: All previous user-defined settings are lost.