Eicon Networks DIVA T/A ISDN Modem - Manual (Page 61)

Analog Device Commands
DIVA T/A ISDN Modem Reference Guide
◆ Page 61
AT*Sn=v Disable Analog Device Calling Features. Specifies whether supplementary service is
to be disabled.
n=1 Analog device port 1 (PHONE 1).
n=2 Analog device port 2 (PHONE 2).
v=0 Disable. Recommended for modem/fax calls.
v=1 Enable with default values (default).
The following two options are for advanced users only.
v=5
Enable using same terminal endpoint identifier as data port.
v=9 Enable using separate terminal endpoint identifier.
Note: This parameter does not take effect until you restart your DIV AT/A.
AT*Vn=v Enable/Disable VoiceMail (North America Only). Specifies whether VoiceMail is
enabled or disabled.
n=1 Analog device port 1 (PHONE 1).
n=2 Analog device port 2 (PHONE 2).
v=0 Disable (default).
v=1 Enable.
Notes:
• If v=0 is selected and voice mail is detected, DIVA T/A automatically enables VoiceMail.
• If the SPID corresponding to an analog device port changes, the parameter will
automatically be reset to 0. Also, if the DIVA T/A is reset to factory profile, the
parameter is reset to 0.
• This parameter does not take effect until you restart your DIV AT/A.
AT*Wn=v Call Waiting Support (International version only). Specifies whether support for call
waiting is enabled.
n=1 Analog device port 1 (PHONE 1).
n=2 Analog device port 2 (PHONE 2).
v=0 Disable.
v=1 Enable (default).