Eicon Networks DIVA T/A ISDN Modem - Manual (Page 17)

DIVA T/A ISDN Modem Reference Guide
◆ Page 17
Alphabetical List of Supported
AT Commands
The following tables summarize, in alphabetical order, the AT Commands supported by the
DIVA T/A. Go to the specified page number for more information on a particular command.
AT! Commands ................................................................... 18
AT% Commands ................................................................ 20
AT& Commands ................................................................. 21
AT* Commands .................................................................. 22
AT> Commands ................................................................. 23
AT@ Commands................................................................. 24
Other AT Commands ....................................................... 25
S-Registers ........................................................................... 26
AT$ (Utility) Commands.................................................. 27
Mini-monitor Commands .............................................. 28
Note: Command descriptions preceded by the word “static” indicates a static parameter.
Changes made to static parameters do not take effect immediately (as opposed to “dynamic”
parameters, where changes take effect the moment they are made). To implement a change
to a static parameter, use the AT&Wn command; the changes will be implemented when you
restart your system.
A list of command groups can be found on page 16.