Eicon Networks DIVA T/A ISDN Modem - Manual (Page 44)

DIVA T/A ISDN Modem Reference Guide
◆ Page 44
V.110 Configuration Commands
Use the following AT commands to specify the V.110 configuration on your DIVA T/A
(International version only).
AT!V0=n V.110 Configuration Override. Specifies whether the DIVA T/A uses the COM port
setting to configure V.110 or overrides them with user settings.
n=0 Use the default settings.
n=1 Override the COM port settings as per AT!V1, AT!V2, AT!V3, AT!V4, and AT!V5
(default).
AT!V1=n V.110 Stream Rate. Specifies the V.110 Stream Rate
Values: 1200, 2400, 4800, 9600, 19200 (default).
AT!V2=n V.110 Character Length. Specifies the character length.
Values: 7, 8 (default).
AT!V3=n V.110 Parity. Specifies the parity used for V.110.
n=0 None (default).
n=1 Even.
n=2 Odd.
n=3 One.
n=4 Zero.
AT!V4=n V.110 Stop Bits. Specifies the Stop Bits used for V.110.
Values: 1 (default), 2.
AT!V5=n V.110 Flow Control. Specifies the Flow Control method to be used for V.110.
n=0 None.
n=1 Receive only (default).
n=2 Transmit only.
n=3 Receive and transmit.