Eicon Networks DIVA T/A ISDN Modem - Manual (Page 29)

DIVA T/A ISDN Modem Reference Guide
◆ Page 29
General AT Commands
The following table describes the general AT commands available to the DIVA T/A.
ATIn View Product Information. Displays information about your DIVA T/A.
n=0 Displays hardware code for the DIVA T/A .
n=1 Displays software checksum.
n=2 Reports “OK”.
n=3 Displays software version.
n=4 Displays capability string.
n=6 Displays data pump chipset version.
n=8 Displays Eicon Technology DIVA T/A.
n=9 Display the external COM port plug and play ID of the DIVA T/A.
n=20 Displays product number.
n=100 Displays list of supported countries (phone).
ATO Return Online. In the online data mode, the DIVA T/A is ready to send and receive data,
providing you are connected. Normally, the DIVA T/A remains in this mode until your
computer sends the data mode escape sequence (+++) or until the call is terminated.
Note: This command can only be used when the DIVA T/A is in the online escape mode.
AT@DATE= Set Date. Sets the date on the DIVA T/A. This command is useful when the DIVA T/A
sends the call ID to a telephone with Call Display (North America only).
AT@DATE? Current Date. Displays the current date of the system. The format is mm-dd-yy.
AT@TIME= Set Time. Sets the time on the DIVA T/A. This command is useful when the DIVA T/A
sends the call ID to a telephone with Call Display. The format is hh:mm:ss.
AT@TIME? Current Time. Displays the current time of the system. The format is hh:mm:ss.
AT@MENU Activate VT100 Configuration Tool. The AT@MENU command activates the DIVA T/A
VT100 Configuration tool for configuring basic ISDN parameters.
AT>Hs View Help Information. Displays full or partial help for any AT command, where s
specifies which AT command help is requested.
AT>VD View Connection and Link Status Information. This command displays link and
connection status for troubleshooting problems. Your Eicon Technology Customer
Services representative may ask you to display this information.
AT>VDC View Connection Status. Displays the connection status.
AT>VDD Initialization Status Display (North America only). Displays information about the
detection progress, the initialization of the logical channels, as well as auxiliary
information.
AT>VDL View Link States. Displays the link states.
AT>VT View Stored Telephone Numbers. You can display a list of all stored telephone
numbers currently saved on your DIVA T/A.
AT>VX View X.25 Status (AO/DI). Displays the status of the X.25 connection.
AT>? Last AT Command Result Explained. The AT>? Command reports the result of the last
AT command issued. This command is useful for debugging long strings of AT
commands and for determining which command was rejected and why.