Eicon Networks DIVA T/A ISDN Modem - Manual (Page 48)

Multilink PPP Commands
DIVA T/A ISDN Modem Reference Guide
◆ Page 48
Endpoint Discriminator Class/Address
The following table describes the list of classes and permitted addresses for certain MultiLink PPP
commands.
Class Description Address Format
0 Null Class No address is used.
1 Locally Assigned
Address Uses a hexadecimal format with a maximum length of 40
characters.
Valid characters: “0-9, a-f”. The number of digits must be even (ex.
AT%M3=b3c665ac11).
2 Internet Protocol (IP)
Address Uses a numerical format with a maximum length of 15 characters.
Valid characters: “0-9” (ex. AT%M4=192.219.23.100).
3 IEEE 802.1 Globally
Assigned MAC Address Uses a hexadecimal format with an exact length of 12 characters.
Valid characters: “0-9, a-f” (ex. AT%M3=b3c665ac1fff).
4 PPP Magic-Number
Block Uses a hexadecimal format with a maximum length of 40
characters, and the length must be a multiple of 8.
Valid characters: “0-9, a-f” (ex. AT%M3=b3c665acffff0001).
5 Public Switched
Network Directory
Number Uses a normal telephone number with a maximum length of 15.
Valid characters are “0-9, *, #”.
255 Accept Any Remote
Endpoint Discriminator No address is used. This class is valid only for remote endpoint
discriminators (EPDs), and is used to accept any remote EPDs
received that are all part of the same bundle.