Eicon Networks DIVA T/A ISDN Modem - Manual (Page 56)

Utility Commands
DIVA T/A ISDN Modem Reference Guide
◆ Page 56
AT$VX Start an AO/DI X.25 Trace.
You can specify the total size of the trace buffer and the length of the each trace entry.
Use the following syntax:
AT$VX [trace size, entry length], where trace size and entry length are specified in
hexadecimal values.
For example, to specify a trace size of 32K and an entry length of 256 bytes, enter: AT$VX
8000, 100.
If you do not specify trace size and length, the default values are used. The default trace
size is 16K, the default entry length is 128 bytes.
AT$Y Enter the monitor on the next reset.
AT$Z Soft reset the unit and enter the monitor.