Grass Valley XtenDD Ordering Guide - Manual (Page 50)

50 XtenDD Ordering Guide XtenDD Ordering Guide 51
LK0116 H Order no: 0 157 410 251
F0-157410-251 initial order only
License for inputs 1-54. No. of inputs: 54.
LK0117 H Order no: 0 157 410 252
F0-157410-252 initial order only
License for inputs 1-72. No. of inputs: 72.
LK0118 H Order no: 0 157 410 253
F0-157410-253 initial order only
License for inputs 1-90. No. of inputs: 90.
LK0254 H Order no: 0 157 410 254
F0-157410-254 later order only
License upgrade. Increases the No. of enabled inputs by 18. S/N of mainframe
must be specified in order.
Aux Bus (Output) Upgrades for 12 RU Mainframe
RC 3161 Order no: 0 212 316 110
F0-212316-110
Serial output 2 for SH-x-BM3 (12 RU). Module with BNC connectors for 10
aux buses (labeled as AUX11 – AUX 20) plus the direct outputs (PGM 2x, PVW,
Clean) for M/E-2 and M/E-3.
LK0124 H Order no: 0 157 410 255
F0-157410-255 initial order only
No. of aux buses: 10. License for 10 aux buses. Enables AUX1-AUX10.
LK0125 H Order no: 0 157 410 256
F0-157410-256 initial order only
No. of aux buses 15. License for 15 aux buses. Enables AUX1-AUX15.
LK0126 Order no: 0 157 410 257
F0-157410-257 initial order only
No. of aux buses 20. License for 20 aux buses. Enables AUX1-AUX20.
LK0258 H Order no: 0 157 410 258
F0-157410-258 later order only
License upgrade. Increases the no. of enabled aux buses to the next step. S/N
of mainframe
must be specified in order.
For chroma keyers, wipe generators, far shadow stores, paint mask stores refer to “Common Options for HD XtenDD
Mainframes.”
HD BASIC MAINFRAMES
This hardware is
already included in
SH-3-BM3 and
SH-4-BM3