beautypg.com

Sd basic mainframes – Grass Valley XtenDD Ordering Guide User Manual

Page 30

background image

30 XtenDD Ordering Guide

XtenDD Ordering Guide 31

XtenDD STANDARD-DEFINITION SWITCHER BASIC MAINFRAMES

XMD-4-BM 4 Order no: 0 212 352 410

F0-212352-410

Basic 7 RU Standard-Definition Mainframe for Four Mix Effects (M/E-1, M/E-2, M/E-3, P/P)

Controller, operating software, genlock, aux-bus motherboard, crosspoint
(input processor) card, control module, M/E-cards. This basic mainframe does
not contain input and output modules.
Production switcher for serial digital video signals according to ITU-R 601/656.
Features:
• 10-bit processing / 270 Mb/s
• 625/525 line standard, switchable or autodetect
• 4:3/16:9 switchable per M/E, manually or per GPI
• 19", 7 RU housing
• LAN connector RJ-45
• 10Base-2 (BNC) connection for 50Ω RG58 cable is available as an option
• Dedicated outputs 2xPGM, 1xPVW, 1 x clean (programmable) per M/E
• Four full function keyers plus one FxLoop keyer per M/E
• Standard (non-redundant) power supply
Options:
• Up to four Dynachrome chroma keyers per M/E
• Up to two wipe generators per M/E
• Mask paint store per M/E
• Far shadow store per M/E
• Up to 38 auxiliary busses
Auxiliary buses are timed and provide Center Cross and adjustable Safe Area
Markers (switchable).
• MaKe Memo Macros – with macro editor
• TiM/E Memo Memory System for timelines and snapshots with 100

registers per M/E, plus 100 in the independent master

Serial Tally
Serial tally enables control systems (Andromeda, Jupiter, or third-party) to
receive and send tally information. For customers not using one of these, the
following types of tally break-out boxes can be used:

MI 3040B Machine Interface provides 40 tally outputs and 40 tally inputs

with screw terminals, 2 RU

GPI-OUT TS 3A A GPI output box provides 48 (40 used) tally outputs with

screw terminals, 1 RU

GPI-OUT SUB 3A B GPI output box provides 48 (40 used) tally outputs on

two 50-pin D-sub connectors, 1 RU

It is possible to use one MI 3040 for input and output and GPI output box for
more tally outputs.

SD BASIC MAINFRAMES