Grass Valley XtenDD Ordering Guide - Manual (Page 44)

44 XtenDD Ordering Guide XtenDD Ordering Guide 45
HD XtenDD HIGH-DEFINITION SWITCHER BASIC MAINFRAMES
7 RU HD XtenDD Mainframes and Dedicated Options
All 7 RU mainframes
Production switcher for high-definition serial digital video signals (HD-SDI)
according to SMPTE 292M.
Features:
• 10-bit processing / 1.485 Gb/s
• 1080i, 720p, and 1080pSF standards
• Switchable. Reference is selectable, analog Tri-Level sync or HD-SDI
reference input
• 19", 7 RU housing
• 20m connection cable
• LAN connector RJ-45
• 10Base-2 (BNC) connection for 50Ω RG58 cable is available as an option
• Up to two mix effects
• Dedicated outputs 2xPGM, 1xPVW, 1 x clean (programmable) per M/E
• Three keyers per M/E
• Standard (non-redundant) power supply
Options:
• Up to two Dynachrome chroma keyers per M/E
• Up to two wipe generators per M/E
• Mask paint store per M/E
• Far shadow store per M/E
• Up to 10 auxiliary busses
Auxiliary buses are timed and provide Center Cross and adjustable Safe Area
Markers (switchable).
• MaKe Memo Macros – with macro editor
• TiM/E Memo Memory System for timelines and snapshots with 100
registers per M/E, plus 100 in the independent master
Serial Tally
Serial tally enables control systems (Andromeda, Jupiter, or third-party) to
receive and send tally information. For customers not using one of these, the
following types of tally break-out boxes can be used:
•
MI 3040B Machine Interface provides 40 tally outputs and 40 tally inputs
with screw terminals, 2 RU
• GPI-OUT TS 3A A GPI output box provides 48 (40 used) tally outputs with
screw terminals, 1 RU
• GPI-OUT SUB 3A B GPI output box provides 48 (40 used) tally outputs on
two 50-pin D-sub connectors, 1 RU
It is possible to use one MI 3040 for input and output and GPI output box for
more tally outputs.
HD BASIC MAINFRAMES
See next section for
12 RU mainframes