Grass Valley XtenDD Ordering Guide - Manual (Page 16)

16 XtenDD Ordering Guide XtenDD Ordering Guide 17
SOFTWARE OPTIONS
LK0130 Order no: 0 157 410 130
F0-157410-130
M/E Couple
This option allows the operator to couple one mix effects bank to another.
Crosspoint selections and transitions in the “master” mix effects bank are also
done in the coupled mix effects bank.
The flexibility of this feature allows you to automatically substitute crosspoints,
as well as define which operations are actually coupled. When one M/E is
coupled to another the crosspoint selection on background, background
preset, and the transition (CUT, AUTO, and T-Bar) are coupled by default.
A separate selection enables the coupling of key/fill crosspoints and a third
selection enables coupling of the next transition selection.
Existing customers use this feature for a wide range of applications, including
4:3/16:9 simulcasting, secondary client output, video wall feeds, etc.
LK0131 Order no: 0 157 410 131
F0-157410-131
Extra Internal DSK
This option for the Standard-Definition XtenDD enables four more DSKs for a
total of eight cascaded DSKs.
This option for the High-Definition HD XtenDD enables three more DSKs for a
total of six cascaded DSKs.
One additional M/E processor RY 3410 is required.
This option is not available for 4 M/E switchers due to space limitations.
Example:
An XtenDD-3 with this option plus an additional M/E-Card (which is then in the
M/E-3 slot) provides the following different outputs:
Connector
Signal
PP-PGM P/P-Background plus DSK1-4
PP-Clean Programmable in between background only and background
plus DSK1-4
PP-PVW Preview for background plus DSK1-4
ME3-PGM P/P-background plus DSK1-8
ME3-Clean Programmable in between background plus DSK1-4 and
background plus DSK1-8
ME3-PVW Preview for DSK5-8
SOFTWARE OPTIONS