Grass Valley XtenDD Ordering Guide - Manual (Page 13)

12 XtenDD Ordering Guide XtenDD Ordering Guide 13
XtenDD-2C Order Number 0 211 909 210
F0-211909-210
Production switcher for serial digital video signals according to ITU-R 601/656.
Switcher package includes the following:
• Two mix effects (M/E-1, P/P)
• 10-bit processing / 270 Mb/s
• 625/525 line standard, switchable or autodetect
• 4:3/16:9 switchable per M/E, manually or per GPI
• 19", 7 RU housing
• 20m connection cable (CAT5, 10Base-T, RJ-45)
• 10Base-T Ethernet switch powered from control panel
• 10Base-2 (BNC) connection for 50Ω RG58 cable is available as an option
• Redundant power supply
• Dedicated outputs 2xPGM, 1xPVW, 1x clean (programmable) per M/E
• Four full function keyers plus one FxLoop keyer per M/E
• One flexible Dynachrome chroma keyer
• One flexible wipe generator
• MaKe Memo macros – now with macro editor
• TiM/E Memo memory system for timelines and snapshots with 100 registers
per M/E, plus 100 in the independent master
• 36 non-looping inputs
• Five auxiliary buses (connectors provided for 20)
• Auxiliary buses are timed and provide Center Cross and adjustable Safe
Area Markers (switchable)
Serial Tally
Serial tally enables control systems (Andromeda, Jupiter, or third-party) to
receive and send tally information. For customers not using one of these,
the following tally break-out boxes are available to convert the serial tally
information into parallel semiconductor relay closures:
RPS35-2S control panel with redundant power supply and input mnemonics.
The control panel comes in one piece.
See “À la Carte
Ordering” for details
on MI 3040B
Machine Interface,
GPI-OUT TS 3A A
GPI output box, and
GPI-OUT SUB 3A B GPI
output box.
For more options see
below, under “Software
Options” and the “À la
Carte Ordering Guide.”