Grass Valley XtenDD Ordering Guide - Manual (Page 20)

20 XtenDD Ordering Guide XtenDD Ordering Guide 21
This application does not use a “main” control panel. The RSAT2 is integrated
into the LAN using an RSE1 controller. Usually the system is configured by a
GUI-PC.
Control Elements:
Program, preset, and key row with 16 buttons each. Mnemonic displays for
source names. Transition section with CUT and T-bar.
• 4x Digipots
• 7x3 Button matrix, programmable with LEDs
• 2x Menu-Ctrl. buttons (step up/down)
• 1x Display mode button (Name<—>Value)
Display Elements:
• 16-character menu function LEDs
• 4x4 character LEDs (i.e., 1x per Digipot)
• Serial connection status display
• Source mnemonics
• “On-air” status
Connectors:
• 1x RS-422 (9-pin D-sub female)
• 1x IEC 320 C14 (AC power supply 85-265V AC, 47-63 Hz, current
consumption max. 0.7A @ 200V 1.4A @ 100V inrush current 15A/30A @
100V/200V AC
Dimensions and Weight:
LxWxD (mm): 464 x 240 x 58
LxWxD (in.): 182.7 x 94.5 x 22.8
Desk cut-out (mm): 441 x 217
Desk cut-out (in.): 173.63 x 85.44
Weight: approx 4 kg (8.8 lbs.)
Options:
19" rackmount frame, 6 RU (RC 2326 order no: 0 351 762 600
resp. F0-351762-600)
RSE1 Order no: 0 212 320 000
F0-212320-000
Stand-Alone Controller
With 19", 1 RU housing, built-in power supply, serial ports and LAN
connection. Together with Switcher Operating Software DS0205 (included) the
RSE1 can be used to connect:
• Additional auxiliary control panels (max. 10 per RSE1)
• Additional under monitor displays (max. 32 per RSE1)
• One satellite panel (either RSAT1 or RSAT2)
ACCESSORIES