Grass Valley XtenDD Ordering Guide - Manual (Page 19)

18 XtenDD Ordering Guide XtenDD Ordering Guide 19
Width: 143 mm, Length: 270 mm
Power supply by separate power supply unit (included)
Customer manual
Ext. power supply block (w. Euro plug)
Wide AC range power supply block (90- 264V, ca.15W)
Plug-in adapters – US, UK, and Australia are included
RSAT2 Order no: 0 351 860 810
F0-351860-810
Satellite Panel 2
The RSAT2 is used for detaching or copying of functions of one switcher M/E,
which are then operated from a different location. There are some pre-defined
function sets, but as with the RSAT1 the functions can also be learned. The
connection is made usually with an RS-422 cable (5m included) to a XtenDD/
DD35 control panel. One satellite panel can be connected to the main panel;
additional satellite panels can be connected using the RSE1 controller (one
satellite panel per RSE1). RSAT2 panels connected via RSE1 controller operate
independent of the main control panel, which is desired for many applications.
The panel can be mounted in table or console. A mounting frame is available
for rack mounting. (19-inch rack mount frame, 6 RU. Type: RC 2326 order no:
0 351 762 600 resp. F0-351762-600)
Inclusive button inlays for standard M/E control.
Application Examples:
• Rehearsal panel: located on-stage this enables the director to see and
work with the camera’s signals while working interactively with the talent
on the stage
• Sub-control: an assistant prepares effects in one M/E
• Secondary control: in many cases (especially in OB vans) there is the need
to generate and submit a signal for secondary clients. Depending on the
complexity this can be an aux bus but also a complete M/E. In the latter
case RSAT2 is an ideally suited panel.
• Compact control panel for -1 mainframe