Grass Valley XSwitch Feb 08 2006 - Manual (Page 51)

XSWITCH Installation and Operation Manual 51
Appendix
C
Specifications
Table 12 and Table 13 list the XSWITCH™ technical specifications.
Table 12. XSWITCH Mechanical Specifications
Mechanical
Dimensions:
Master (DSW-2000) L: 17.5 in (44.5 cm)
H: 10.5 in (26.7 cm)
D: 10.5 in (26.7 cm)
Expansion (DSW-2100) L:17.5 in (44.5 cm)
H: 7.5 in (17.8 cm)
D: 10.5 in (26.7 cm)
AC Power 100V - 240VAC, 60/50Hz, 8A/4A
Power Supply Hot-Swappable, Dual-Redundant, 250W
Temperature Range 32° - 100° F (0° - 38° C)
Humidity Range 0-95% Non-Condensing
Display Type 160x80 STN LCD with Backlight
Weight:
Master (DSW-2000) 35 lbs. (16 Kg
Expansion (DSW-2100) 19.5 lbs. (8.8 Kg)
Table 13. XSWITCH Electrical Specification
Electrical
Com Switch card:
Connector Type Input: DB9-socket, Output: DB9-pin
Switch Type Passive Relay, “form C”
Signal Type RS232, RS422, RS485
Signal Switch timing 6ms including settling time
SDI Switch Card:
Connector Type 75 ∧, BNC
Signal Type 270 Mbits/s SDI (SMPTE 259M), Composite
Signal Switch timing 6ms including settling time
Switch Type Passive Relay
Signal Switch timing 6ms including settling time
Termination 75 ∧ Termination on “open” signal paths
Audio Switch Card:
Connector Type XLR, Balanced
Switch Type Active, Fully Buffered, “Pop Free”