Hardware setup and installation, Unpacking, Hardware – Grass Valley XSwitch Feb 08 2006 User Manual
Page 11: Documentation, Master module switch card installation, Section 2 — hardware setup and installation

XSWITCH Installation and Operation Manual
11
Section
2
Hardware Setup and
Installation
Unpacking
The following list indicates the items that should have been shipped with
the XSWITCH™. If any items are missing, contact Grass Valley immedi-
ately for the missing items.
Hardware
DSW-2000 XSWITCH Master Module (With installed Switch Cards). The
DSW-2000 is standard with Ignite 1000 and Ignite 2000 fully redundant sys-
tems.
DSW-2100 XSWITCH Expansion Module (With installed Switch Cards).
The DSW-2100 is standard with Ignite 3000 and Ignite 4000 full redundant
systems.
DSW-3000 XSWITCH (With installed Switch Cards, KVM Module, one
VGA card, and one Comm Card). The DSW-3000 is standard with Ignite
partially redundant systems
Documentation
XSWITCH Installation and Operations Manual
Master Module Switch Card Installation
The Master Module comes pre-loaded with Switch Cards; however, it is
important to note how cards are installed in case a replacement card or
alternate card is ever needed. The information below is for reference in
such cases.