Grass Valley LDK 7500 User Guide - Manual (Page 23)

Assembling the Units FilmStream mode 2-7
The horizontal position of the viewfinder can be adjusted as follows to
suit your requirements:
a.
Loosen the locking ring (1) . (As seen from the rear of the camera,
turning the locking ring counterclockwise moves it towards the
handle.)
b. Slide the viewfinder horizontally along the rail to the desired
position.
c. Tighten the locking ring (1) by turning clockwise.
The dioptre hood and eyepiece of the viewfinder can be rotated
vertically.
The viewfinder can be positioned backwards and forwards along the
camera axis. Loosen the support bracket round bar retaining lever
(2)
and slide the round bar (3) forwards or backwards. When the desired
position is reached tighten the support bracket round bar retaining
lever
(2) again.
To use the viewfinder at a distance press the button (4) below or above
the eyepiece tube and swing it free of the associated clip (5) . The
display can now be seen from further away.