Grass Valley LDK 7500 User Guide - Manual (Page 106)

4-12 HD video mode Viper
Viewfinder
Tally indicators (red)
The red tally indicators at the front of the viewfinder and at the rear of
the carrying handle light to indicate that the camera is recording.
Tally switch
The tally switch is used to control the tally indicators at the front of the
viewfinder and at the rear of the carrying handle.
When this switch is set to the ON position, the front tally indicator lights
when the camera is recording. The front tally does not light during
recording if the tally switch is set to OFF. The rear tally light does not
depend on the position of the tally switch if the Tally Handgrip setting
in the Install menu is set to ON - it lights during recording. If the Tally
Handgrip setting in the Install menu is set to SWITCH, the rear tally is
controlled by the tally switch.
2
3
4
5 6 7
1
8
2
1