Grass Valley LDK 7500 User Guide User Manual
Page 21
Assembling the Units
FilmStream mode
2-5
Mounting the 2-inch viewfinder and microphone holder
To mount the 2-inch viewfinder proceed as follows:
a.
Loosen locking ring
(1)
of viewfinder support bracket
(2)
at the
front of the camera handle. (As seen from the rear of the camera,
turning the locking ring counterclockwise moves it towards the
handle.)
b.
Slide the viewfinder onto the viewfinder support bracket.
c.
Tighten the locking ring
(1)
by turning it clockwise (as seen from
rear) so that the viewfinder is mounted securely to the support.
d.
Connect the viewfinder cable to the viewfinder connector socket
(4)
at the top right of the camera.
e.
Slide the microphone holder
(5)
onto the viewfinder and secure
with the knurled screw
(6)
.
Caution
Always fit the microphone holder
(5)
even if you don’t use
a microphone as it functions as a safety stop for the
viewfinder.
f.
To improve the comfort of the skin contact when using the
viewfinder, fit the eyepiece cover
(3)
to the rubber eyepiece.