Grass Valley LDK 7500 User Guide - Manual (Page 123)

Set-up and operation HD video mode 5-9
e. When the process is completed (within a few seconds) the OK
message and the measured temperature appear in the viewfinder.
The measured colour temperature is now stored in the selected
memory position and can be recalled as required.
Note: During the auto-white measurement process iris is set to
Auto and 90% and the knee is turned off.
The camera is now ready for use.
Start recording
If your recording system supports this function, you can use the Rec.
start button on the front-left of the camera to start (and stop) the
recording system. The tally indicators light when recording is in
progress.
Focussing
To assist with optical focussing through the viewfinder, use the VF
Zoom button on the left-front of the camera to enlarge the centre
of the viewfinder image.
A crawler function (that can be switched on or off in the VF menu)
adds motion in the viewfinder to objects in sharp focus.
ND/RE BATT TAPE REC ++ + -
AW2 AW1 FL 7.5 5.6 3.2
FOC+
4.7 !
AWHITE OK: 3700K