Grass Valley XG Vertigo Configuration Guide v.5.0 - Manual (Page 8)

Vertigo XG Configuration Guide 1-3
Introduction
The following options are available to both models of the Vertigo XG:
VX-RS422-2-e 2 port RS-422 card
The RS-422 card provides an interface upon which the Vertigo XG can
communicate with automation systems. See
“RS-422 Connectors” on
page 2-6 for more information.
VX-Audio-e Audio processor
The Audio option allows you play out audio clips and voice-over tracks.
See “Audio input/output channels” on page 2-11 for more information.
VX-EAS EAS Text Integration (EAS Plugin and EAS Software Panel)
High quality EAS text and audio can be played out with the Vertigo XG
processor, using templates which integrate channel branding graphics
for a consistent on-air presentation.
VX-GPI-8-e GPI card
The GPI card allows for control of the Vertigo XG via GPI triggers. The
card allows for up to 8 GPI in and 8 GPI out. See
“GPI Card Connector”
on page 2-8 for more information about the GPI card option.
VX-TC-e Time Code card
The Time Code card allows you to lock the Vertigo XG’s system clock to
an external timecode. See
“Time Code Card” on page 2-6 for more
information about the Time Code option.
VX-ClipPlayer Clip Player
The Clip Player is an internal codec package for playing out multi-format
video clips. See
“Clip Player and media storage” on page 2-13 for more
information about the Clip Player option.
VX-2TB-UPG 1 TB RAID10 Expansion option (2 x 1TB)
Increases the usable storage from 1TB to 2TB. See “Clip Player and
media storage” on page 2-13 for more information.