Grass Valley XG Vertigo Configuration Guide v.5.0 - Manual (Page 74)

Vertigo XG Configuration Guide 5-19
Dashboard - Vertigo XG’s Local Configuration Software
General page
Selecting the G ENERAL tab in Advanced Settings mode, opens the General settings page
(figure 5-8 ). This configuration page provides you access to a series of miscellaneous
device parameters, including storage settings and communication settings between the
Vertigo devices, Xplay, and/or the broadcast monitor.
Figure 5-8. The General settings tab and page on the Dashboard Window
A SSETS P UBLISH P ATH : Identifies the directory location where assets are stored on the
Vertigo device, or on the host computer (software CG). The default directory
paths for the Vertigo hardware devices is F\:Scene\, while the default
directory path for the Vertigo Software CG is C\:Scene\.
Assets are automatically placed within appropriate subfolders by the publish
agent. For example, images are stored in the Image subfolder.
TCP/IP C OMMAND P ORTS : Sets the communications port used by the Vertigo devices
and Vertigo software CG for command and control between applications
(i.e. Vertigo XG and Xplay). This port must be open and 2-way unblocked on
the Vertigo device’s subnet.
S TATISTICS E NABLED : Displays the frame rate, video card, and memory use on the output
display for debugging purposes.
E XTRA I NFO : Displays timing information (Dx9, DSX, Readback) on the
Vertigo XG’s output display for debugging purposes. Timing values are
displayed in milliseconds for each thread.