Automation configuration, Automation configuration -8 – Grass Valley XG Vertigo Configuration Guide v.5.0 User Manual
Page 33
3-8
Vertigo XG Configuration Guide
Vertigo XG’s Desktop Applications & Tools
Automation Configuration
For the Vertigo XG to be controlled by an automation system, the Vertigo XG device must be
mapped to an automation protocol in Xplay’s Automation Configuration window (figure
3-7
).
Figure 3-7. Xplay Automation Configuration dialog box
N
OTE
The Vertigo XG device must be added to Xplay’s Device Manager prior to opening the
Automation Configuration window. See
for more information about the Device
Manager.
To set or verify Xplay’s Automation Configuration settings:
1.
In Xplay, select T
OOLS
>A
UTOMATION
C
ONFIGURATION
.
The X
PLAY
A
UTOMATION
C
ONFIGURATION
window appears (figure
3-7
).
2.
Verify that the Vertigo XG device is displayed in the D
EVICE
TO
PROTOCOL
MAPPINGS
list.
3.
Verify that the Vertigo XG device is mapped to an appropriate protocol by expanding
the device’s heading in the D
EVICE
TO
PROTOCOL
MAPPINGS
list.
Figure 3-8. The Vertigo XG’s Automation Configuration (mapping and properties)