Grass Valley T2 Classic iDDR Addendum - Manual (Page 43)

November 30, 2010 Users Manual (Addendum for SP3) 43
Exporting an AVC-Intra MXF file from EDIUS 6
CAUTION: By default, the system will pause any transfer and conversion during a
recording or playback. If you want to change the setting to allow transfer and
conversion to be performed even during a recording or playback, click
Config. and
then click Common in the "Transfer" tree. Unchecking Pause file transfers while
recording or playing out. enables transfer and conversion even during a recording
or playback. However, if this option is unchecked, the recording/playback
operations may not be performed normally, therefore, we recommend that you use
the system with this option checked.
Exporting an AVC-Intra MXF file from EDIUS 6
A project created on a PC that has EDIUS 6 installed can be exported to your T2 via
FTP.
You need to configure the FTP server settings in both EDIUS 6 and T2 beforehand.
For more information on how to configure the FTP settings, see
"Sending/receiving
XDCAM sources to/from your T2 via FTP" on page 21 .
In EDIUS 6, you need to open the "Importer/Exporter" tree in the system settings and
configure the FTP server in "MXF". For more information, please refer to the EDIUS
User Reference Guide.
CAUTION: If you want to use Chinese for file names, you must set the character set
of file names to UTF-8 on the FTP client side beforehand. Correct file names cannot
be displayed if the character sets do not match. The configuration method depends
on your software. Refer to the help etc. of your software.