Grass Valley T2 Classic iDDR Addendum - Manual (Page 39)

November 30, 2010 Users Manual (Addendum for SP3) 39
Importing P2 sources
2. Select the clip(s) you want to import, right-click on it, and then click Import .
• Multiple clips can be selected.
• The Import dialog box appears.
3. Click Config... .
• The "Format" column in the list shows the format to be imported. If no change
is necessary, you do not need to use Config. to change the setting. Proceed to
step 5.
4. From the "File format after import:" list, select P2 and then click OK .
5. Select the import destination bin.
• You can click New Bin to create a new bin and specify it as the import
destination.
• You can select a clip in the clip list on the Import dialog box and click Up or
Down to change the import order.
• You can select a clip in the clip list on the Import dialog box and click Delete to
delete it from the import list.
6. Click Start .
• The import begins. You can check the progress in the transfer screen.